Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Anaheim?
Panel replacement in Anaheim typically costs $250 – $500 for a single damaged section, including the panel, color match, and labor. A single full-width panel on a standard two-car door usually lands around $300 – $450. Homes with discontinued panel profiles, carriage-style doors, or doors that need two or more sections replaced run higher, often toward the top of that range or above it.
We work on the brand already in your garage. If you’ve got a Clopay, Amarr, Wayne Dalton, or Raynor door, we’re matching the panel to the manufacturer’s spec rather than trimming a generic section to fit. That’s the difference between a repair that holds and one you’re redoing in a year.
Panel Replacement Cost Breakdown (2026)
Here’s what Anaheim homeowners actually pay for panel work this year. These are real ranges based on the local market, not national averages.
| Line Item | Typical Price Range |
|---|---|
| Single panel replacement (one section) | $250 – $500 |
| Two-panel replacement | $450 – $850 |
| Garage door repair (general, for comparison) | $150 – $600 |
| Track realignment (often needed after impact) | $120 – $240 |
| Roller replacement (bundled while we’re in there) | $110 – $220 |
| New door installation (if damage is total) | $700 – $2,200 |
What pushes the price up on a panel job: discontinued door models from the early 2000s, custom carriage-house panel styles, insulated or steel-backed panels, and doors that took a hit hard enough to knock the track out of square. What pulls it down: a common panel profile still in production, a single dented lower panel with no structural damage, and matching color that’s still a standard stock item.
Most Anaheim panel replacements are a same-day job. We carry common profiles in the truck. If we need to order a manufacturer panel, expect three to seven business days, and the price usually doesn’t change much beyond the shipping.
What Affects Panel Replacement Pricing in Anaheim
Panel work isn’t priced the same as a spring swap. It’s a cosmetic and structural job at the same time, so several things move the number:
- Door brand and age. We’re fluent across eight manufacturers: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. A Clopay panel from a current line is easy. A 15-year-old Wayne Dalton with a discontinued profile is not. Brand-matched panels cost less to source and fit right the first time.
- Panel style and insulation. Basic steel raised-panel sections sit at the low end. Insulated, carriage-style, or windowed panels cost more, sometimes two to three times a plain section, because the manufacturing and matching are harder.
- Anaheim coastal air and dry heat. Anaheim sits far enough inland to get dry, hot summers and the occasional marine layer that traps moisture along the door. Paint fades and steel rusts at the seams over years. If your panel failed because of age and weather, we’ll usually recommend inspecting both lower panels while we’re on site.
- Hidden damage. A dented panel sometimes hides a bent hinge or a track pushed out of alignment. Once we’re in there, fixing the track is often cheaper than a second call-out later. Add track realignment ($120 – $240) if needed.
- Number of panels. One panel is a repair. Three or four panels on the same door approaches replacement territory. If you’re staring at that, it’s worth reading up on the full garage door services we offer before deciding.
- Whether the door was ever re-painted or re-wrapped. Cars parked a little too close, basketballs, an errant bicycle handlebar: dent damage is the most common reason we get called to Anaheim homes. If the door was previously refinished, color matching the new panel to a sun-faded door can add time.
How to Save on Panel Replacement
There’s not a ton of room to haggle on panel work, but a few moves keep the bill closer to $250 than $500:
- Don’t wait for the dent to spread. A small dented lower panel that gets replaced early stays a $250 – $350 job. Wait two years, and rust or hinge damage pulls in track and roller work, adding $200 or more.
- Bundle the small stuff. Have a squeaky roller or a worn hinge? Adding those to a panel job is cheaper than a separate visit. Roller replacement runs $110 – $220 on its own but is often less when bundled.
- Stick with a current production profile. If your door is from a discontinued line, sometimes replacing a full set of lower panels in a current profile is cheaper than sourcing a rare match. We’ll walk you through both options and the total cost of each.
- Get a real number up front. Free estimates are free for a reason: they prevent surprise charges. Call (833) 589-5745 and we’ll give you a range before we schedule the work.
One honest note: panel replacement is usually worth it when the door frame, opener, and track are still solid. When they’re all failing, a full new door installation in the $700 – $2,200 range can be the better number over the next decade. We’ll tell you which one actually makes sense for your door.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Anaheim?
Panel replacement in Anaheim runs $250 – $500 for a single panel, including labor and color match. Two panels typically land at $450 – $850. Call (833) 589-5745 for an exact quote; estimates are free.
Is it cheaper to replace a panel or replace the whole door?
Replacing one panel is almost always cheaper: $250 – $500 versus $700 – $2,200 for a new door. The break-even point is usually around three damaged panels on the same door, or damage that’s pushed the track out of square. Call (833) 589-5745 and we’ll tell you which way the math goes on your specific door.
Can you match the color of my existing door?
Yes, in most cases. For the eight brands we work on (LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor), we source the manufacturer’s current panel in the matching profile and color. Expect a slight shade variance on a door that’s been in the Anaheim sun for a decade; sometimes a full re-paint is worth the extra to even it out.
How long does a panel replacement take?
Most single-panel replacements take two to four hours, done same-day when the panel profile is in stock. Ordered panels run three to seven business days to arrive, plus the same install window. Call (833) 589-5745 to check stock on your door’s brand.
Can a damaged panel be repaired instead of replaced?
Sometimes, yes. A shallow dent with no structural kink in a steel panel can sometimes be pushed out and touched up, which is cheaper than a replacement. A dent that’s creased the panel, split the insulation, or bent the stile needs replacement. We’ll look at it and give you the honest call.
Why Anaheim Homeowners Call Porter Garage Door
Garage doors are all we do. No plumbing, no HVAC, no handyman calls. That single-trade focus is why our technicians carry the right parts for your door and don’t guess at the brand. From the spring to the smart opener, we handle the whole system, and panel work sits right in the middle of what we do every week.
We work on the brand already in your garage, so you’re not stuck with whatever a generalist happens to stock. That brand fluency is the difference between a panel that matches and one that almost does.
Need a closer look at what we do for panels specifically? See our dedicated Panel Replacement in Anaheim page for the full scope. For a free estimate on your panel, whether it’s one dented section or a row of them, call Porter Garage Door at (833) 589-5745 and we’ll give you a straight answer and a real number.
Pricing reflects the Anaheim market as of 2026. Porter Garage Door offers free estimates – call (833) 589-5745.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Hector Guzman"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Lina Karam"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Elena Garcia